|
Product Code: TRE767X1/2TC
This adjustable chamfer set can be used to produce chamfers on the top and bottom edges.
The width of timber accommodated by the cutter can be varied by adding spacers above and below the guide bearing.
Smaller timber thicknesses can be accommodated by moving the bearing below both blocks.
By reversing the positions of the blocks, an alternative angle can be achieved.
Dimensions:
D=35 mm
B=22 mm
A=45 degrees
A2=30 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Grade: TCT
Diameter Metric: 35
Bearing Diameter Metric: 22
Angle: 45 degrees , A2=30
|
;)
Powered By A Total Access Business System